國別 | 標準號 | 中文題名 | 英文題名 |
中國 | GB 7543-2006 | 一次性使用滅菌橡膠外科手套 | Single-use sterile rubber surgical gloves |
GB 10213-2006 | 一次性使用醫用橡膠檢查手套 | Single-use medical rubber examination gloves | |
GB/T 21869-2008 | 醫用手套表面殘余粉末的測定 | Medical gloves.Determination of removable surface powder | |
GB/T 21870-2008 | 天然膠乳醫用手套水抽提蛋白質的測定. 改進Lowry法 | Medical gloves made from natural rubber latex.Determination of water-extractable protein using the modified lowry method | |
GB 24786-2009 | 一次性使用聚氯乙烯醫用檢查手套 | Single-use medical poly (vinyl chloride) examination gloves | |
GB 24788-2009 | 醫用手套表面殘余粉末、水抽提蛋白質限量 | Limit for the removable surface powder and water-extractable protein of medical gloves | |
YY/T 0616.1-2016 | 一次性使用醫用手套.第1部分: 生物學評價要求與試驗 | Medical gloves for single use.Part 1:Requirements and testing for biological evaluation | |
YY/T 0616.2-2016 | 一次性使用醫用手套 第2部分: 測定貨架壽命的要求和試驗 | Medical glove for single use.Part 2:Requirements and testing for shelf life determination | |
YY/T 0616.3-2018 | 一次性使用醫用手套 第3部分: 用倉貯中的成品手套確定實際時間失效日期的方法 | Medical gloves for single use.Part 3:Determination of real time expiration dating of mature medical gloves stored under typical warehouse conditions | |
YY/T 0616.4-2018 | 一次性使用醫用手套 第4部分: 抗穿刺試驗方法 | Medical glove for single use.Part 4:Test method for the puncturation resistance | |
YY/T 0616.5-2019 | 一次性使用醫用手套 第5部分: 抗化學品滲透 持續接觸試驗方法 | Medical gloves for single use Part 5: Test Method for Permeation of Chemicals under Conditions of Continuous Contact | |
CNS 12543-1997 | 外科手術用橡膠手套 | Surgical rubber gloves | |
CNS 12837-1991 | 一般醫療用聚氯乙烯手套 | Polyvinyl Chloride Medical Gloves | |
CNS 12838-1991 | 一般醫療用聚氯乙烯手套檢驗法 | Method of Test for Polyvinyl Chloride Medical Gloves | |
國際 | ISO 11193-1-2008 | 一次性醫用檢驗手套. 第1部分: 橡膠乳膠或膠液制手套規范 | Single-use medical examination gloves - Part 1: Specification for gloves made from rubber latex or rubber solution |
ISO 11193-1 AMD 1-2012 | 一次性醫用檢驗手套. 第1部分: 橡膠乳膠或膠液制手套規格.修改件1 | Single-use medical examination gloves - Part 1: Specification for gloves made from rubber latex or rubber solution; Amendment 1 | |
ISO 11193-2-2006 | 一次性醫用檢查手套. 第2部分: 聚乙烯(氯乙烯)制手套規范 | Single-use medical examination gloves - Part 2: Specification for gloves made from poly(vinyl chloride) | |
ISO 12243-2003 | 醫用天然膠乳手套 用改性格雷法測量可水萃取的蛋白質 | Medical gloves made from natural rubber latex determination of water-extractable protein using the modified lowry method first edition | |
ISO 21171-2006 | 醫療專用手套.可移動表面粉末的測定 | Medical gloves - Determination of removable surface powder | |
歐洲 | EN 455-1-2000 | 一次性醫用手套. 第1部分: 無孔試驗和要求 | Medical gloves for single use. Part 1: Requirements and testing for freedom from holes |
EN 455-2-2015 | 一次性醫用手套. 第2部分: 物理性能要求和試驗 | Medical gloves for single use - Part 2: Requirements and testing for physical properties | |
EN 455-3-2015 | 一次性醫用手套 第3部分:生物評定要求和試驗 | Medical gloves for single use. Part 3:Requirements and testing for biological evaluation | |
EN 455-4-2009 | 一次性醫用手套. 第4部分: 保質期測定要求和檢驗 | Medical gloves for single use - Part 4: Requirements and testing for shelf life determination | |
CEN/TR 16953-2017 | 一次性醫用手套. 選擇指南 | Medical gloves for single use - Guidance for selection | |
EN ISO 21171-2006 | 醫療專用手套.可移動表面粉末的測定 ISO 21171-2006 | Medical gloves Determination of removable surface powder | |
美國 | ASTM D3578-2019 | 橡膠檢驗手套標準規范 | Standard Specification for Rubber Examination Gloves |
ASTM D5151-2006(2015) | 檢測醫用手套漏孔的標準試驗方法 | Standard Test Method for Detection of Holes in Medical Gloves | |
ASTM D5250-2019 | 醫用聚氯乙烯手套的標準規范 | Standard Specification for Poly(vinyl chloride) Gloves for Medical Application | |
ASTM D6124-2006(2017) | 醫用手套殘余粉末的標準試驗方法 | Standard Test Method for Residual Powder on Medical Gloves | |
ASTM D6319-2000a(2005) | 醫用腈橡膠檢驗手套的標準規范 | Standard Specification for Nitrile Examination Gloves for Medical Application | |
ASTM D6319-2010 | 醫用腈類檢驗手套的標準規范 | Standard Specification for Nitrile Examination Gloves for Medical Application | |
ASTM D6319-2019 | 醫用腈檢驗手套規格 | Standard Specification for Nitrile Examination Gloves for Medical Application | |
ASTM D6355-1998(2003) | 醫用手套人重復損害修補試驗的標準試驗方法 | Standard Test Method for Human Repeat Insult Patch Testing of Medical Gloves | |
ASTM D6977-2019 | 醫療檢查用氯丁橡膠手套的標準規格 | Standard Specification for Polychloroprene Examination Gloves for Medical Application | |
ASTM D6978-2005(2019) | 醫用手套對化療藥物滲透阻力的評價的標準操作規程 | Standard Practice for Assessment of Resistance of Medical Gloves to Permeation by Chemotherapy Drugs | |
ASTM D7102-2010 | 測定無菌醫用手套上的內毒素的標準指南 | Standard Guide for Determination of Endotoxin on Sterile Medical Gloves | |
ASTM D7103-2018 | 醫用手套評定的標準指南 | Standard Guide for Assessment of Medical Gloves | |
ASTM D7160-2016 | 醫用手套有效期測定的標準實施規程 | Standard Practice for Determination of Expiration Dating for Medical Gloves | |
ASTM D7161-2016 | 測定典型倉庫條件下存放的成熟醫用手套實時有效期的標準實施規程 | Standard Practice for Determination of Real Time Expiration Dating of Mature Medical Gloves Stored Under Typical Warehouse Conditions | |
ASTM D7907-2014 | 測定醫用檢查手套表面殺菌作用的標準試驗方法 | Standard Test Methods for Determination of Bactericidal Efficacy on the Surface of Medical Examination Gloves | |
ANSI/ADA 102-1998 | 牙醫用無菌丁二烯手套 | Non-Sterile Nitrile Gloves for Dentistry | |
ANSI/ADA 103-2001 | 牙醫用無菌增塑聚氯乙烯手套 | Non-Sterile Polyvinyl Chloride Gloves for Dentistry | |
英國 | BS EN 455-1-2000 | 一次性醫用手套 無孔要求和測試 | Medical gloves for single use. Requirements and testing for freedom from holes |
BS EN 455-2-2015 | 一次性醫用手套.物理性質的要求和測定 | Medical gloves for single use. Requirements and testing for physical properties | |
BS EN 455-3-2015 | 一次性醫用手套 第3部分:生物評定要求和試驗 | Medical gloves for single use. Requirements and testing for biological evaluation | |
BS EN 455-4-2009 | 一次性醫用手套.第4部分: 測定貨架壽命的試驗和要求 | Medical gloves for single use Part 4: Requirements and testing for shelf life determination | |
BS EN ISO 21171-2006 | 醫療專用手套.可移動表面粉末的測定 | Medical gloves - Determination of removable surface powder | |
BS ISO 12243-2003+A1-2012 | 醫用天然膠乳手套 用改良的半細胞法測定水可萃取蛋白質 | Medical gloves made from natural rubber latex. Determination of water-extractable protein using the modified Lowry method | |
BS PD CEN/TR 16953-2017 | 一次性醫用手套. 選擇指南 | Medical gloves for single use. Guidance for selection | |
德國 | DIN 58133-2008 | 醫療壓縮襪 | Medical compression hosiery |
DIN EN 455-1-2001 | 一次性醫用手套. 第1部分:密封性要求和檢驗 | Medical gloves for single use - Part 1: Requirements and testing for freedom from holes; German version EN 455-1:2000 | |
DIN EN 455-2-2015 | 一次性醫用手套. 第2部分:物理特性用要求和試驗.德文版本EN 455-2-2015 | Medical gloves for single use - Part 2: Requirements and testing for physical properties; German version EN 455-2:2015 | |
DIN EN 455-3-2015 | 一次性醫用手套. 第3部分:生物評定要求和試驗;德文版本EN 455-3-2015 | Medical gloves for single use - Part 3: Requirements and testing for biological evaluation; German version EN 455-3:2015 | |
DIN EN 455-4-2009 | 醫用手套一次性使用 第4部分：保質期確定的要求和測試; | Medical gloves for single use. Part4: Requirements and testing for shelf life determination; German version EN455-4:2009 | |
DIN EN ISO 21171-2006 | 醫療專用手套. 可移動表面粉末的測定 (ISO 21171-2006) | Medical gloves - Determination of removable surface powder (ISO 21171:2006) English version of DIN EN ISO 21171:2006-08 | |
法國 | NF S97-004-2006 | 醫療專用手套. 可移動表面粉末的測定 | Medical gloves - Determination of removable surface powder. |
泰國 | TIS 1056.1-2013 | 一次性醫用檢查手套. 第1部分: 橡膠乳膠或橡膠溶液制手套規范 | Single-use medical examination gloves part 1: specification for gloves made from rubber latex or rubber solution |
TIS 1056-2005 | 一次性醫用檢查手套. 第1部分: 橡膠乳膠或橡膠溶液制手套規范 | Single.use medical examination gloves.part 1: specification for gloves made from rubber latex or rubber solution | |
越南 | TCVN 6343-1-2007 | 一次性醫用檢查手套. 第1部分: 橡膠膠乳或膠液制手套規范 | Single-use medical examination gloves.Part 1: Specification for gloves made from rubber latex or rubber solution |
TCVN 6343-2-2007 | 一次性醫用檢查手套. 第2部分: 聚乙烯(氯乙烯)制手套規范 | Single-use medical examination gloves.Part 2: Specification for gloves made from poly (vinyl chloride) | |
其他國家 | GOST EN 455-1-2014 | 一次性醫用手套. 第1部分. 緊密性的測定方法 | Medical gloves for single use. Part 1. Method for determination of tightness |
GOST EN 455-2-2014 | 一次性醫用手套. 第2部分. 物理特性的測定方法 | Medical gloves for single use. Part 2. Method for determination of physical-mechanical properties | |
GOST R 52239-2004 | 一次性醫療檢查手套. 第1部分: 橡膠乳膠或橡膠膠漿制手套規范 | Single-use medical examination gloves. Part 1. Specification for gloves made from rubber latex or rubber solution | |
GOST R 57397-2017 | 醫療檢查用橡膠手套. 技術要求 | Rubber examination medical gloves. Technical requirements | |
GOST R 57402-2017 | 醫用手套. 使用期限的測定 | Medical gloves. Determination of expiration dating | |
GOST R 57403-2017 | 醫用聚氯乙稀手套. 技術要求 | Poly(vinyl chloride) medical gloves. Technical requirements | |
GOST R 57404-2017 | 醫用手套. 質量評估指南 | Medical gloves. Quality assessment guide | |
SANS 11193-1-2010 | 一次性使用醫用檢查手套 第1部分：橡膠膠乳或橡膠溶液制成的手套規范 | Single-Use Medical Examination Gloves Part 1: Specification For Gloves Made From Rubber Latex Or Rubber Solution | |
SANS 15190-2016 | 醫用手套 安全要求 | Medical laboratories - Requirements for safety | |
LST EN 455-1-2001 | 一次性醫用手套. 第1部分:孔自由度試驗和要求 | Medical gloves for single use - Part 1: Requirements and testing for freedom from holes | |
LST EN 455-2-2015 | 一次性醫用手套. 第2部分: 物理特性的要求和檢驗 | Medical gloves for single use - Part 2: Requirements and testing for physical properties | |
LST EN 455-3-2015 | 一次性醫用手套. 第3部分: 生物評價的要求和試驗 | Medical gloves for single use - Part 3: Requirements and testing for biological evaluation | |
LST EN ISO 21171-2006 | 醫用手套表面殘余粉末的測定(ISO 21171-2006) | Medical gloves - Determination of removable surface powder (ISO 21171:2006) | |
SNI ISO 11193.1-2010 | 一次性醫用檢驗手套. 第1部分:用橡膠乳和膠液制成的手套規范 | Single-use medical examination gloves - Part 1: Specification for gloves made from rubber latex or rubber solution | |
SNI ISO 11193.2-2010 | 一次性醫用檢查手套. 第2部分: 聚氯乙烯制成的手套規格 | Single-use medical examination gloves - Part 2: Specification for gloves made from poly(vinyl chloride) | |
STN EN 455-1-2002 | 一次性醫用手套. 第1部分: 指孔間自由度的要求和試驗 | Medical gloves for single use. Part 1: Requirements and testing for freedom from holes | |
STN EN 455-2-2015 | 一次性醫用手套. 第2部分: 物理特性的要求和檢驗 | Medical gloves for single use - Part 2: Requirements and testing for physical properties | |
STN EN 455-4-2009 | 一次性醫用手套. 第4部分: 測定貨架壽命的要求和試驗 | Medical gloves for single use - Part 4: Requirements and testing for shelf life determination | |
ABNT NBR ISO 11193-1-2009/Amd 1-2015 | 一次性醫用檢驗手套。第1部分：用膠乳或膠水制成的手套規范 | ||
ABNT NBR ISO 11193-1-2015 | 一次性醫用檢驗手套 | Single-use medical examination gloves | |
ABNT NBR ISO 11193-2-2013 | 一次性使用的醫療檢查手套 第2部分：由聚氯乙烯制成的手套 | Single-use medical examination gloves Part 2: Specification for gloves made from poly (vinyl chloride) | |
DS/EN 455-3-2007 | 一次性使用醫用手套第3部分:生物學評價要求和測試 | Medical gloves for single use - Part 3: Requirements and testing for biological evaluation | |
DS/EN ISO 21171-2006 | 醫用手套可移動表面粉末的測定 | Medical gloves - Determination of removable surface powder |
中科檢測具備相關資質能力，能依據相關標準對防護產品進行檢測，確保生產質量。如有這方面的業務需求，歡迎聯系。
